How to install a pet drinking fountain?

The installation of a pet water dispenser is usually simple. Here are some basic steps:

1. Choose a location:
- Choose a stable place that is not easily knocked over by pets.
- Make sure the location is away from pet food to prevent food from contaminating the water source.
- Choose a place that is easy to clean and maintain.

2. Check accessories:
- Confirm that all accessories are complete in the package, including the water dispenser body, power adapter, filter element, etc.

3. Install the filter element:
- Install the filter element to the corresponding position of the water dispenser according to the instructions.
- Make sure the filter element is installed correctly and there is no water leakage.

4. Add water:
- Add the appropriate amount of water to the water dispenser, which is usually indicated by a water level line.
- Make sure the water is clean, and you can use filtered water or purified water.

5. Connect the power supply:
- Plug the power adapter into the water dispenser and connect it to the power outlet.
- Make sure the power adapter and the outlet match to avoid damage caused by voltage mismatch.

6. Test run:
- Turn on the power and check if the dispenser is working properly and the water flow is smooth.
- Observe the pet's reaction to the dispenser to ensure that they can drink water normally.

7. Cleaning and maintenance:
- Clean the dispenser regularly to avoid bacterial and algae growth.
- Replace the filter according to the instructions to keep the water clean.

8. Observe the pet:
- Observe the pet's use of the dispenser. If the pet is not used to it, it may take some time to adapt, or consider changing to another type of dispenser.

If you have a specific pet dispenser model, more detailed installation instructions can be provided. Different brands and models may differ in installation details.